 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NEC's 1/4 W SINGLE CONTROL UPG2012TK L, S-BAND SPDT SWITCH FEATURES * SUPPLY VOLTAGE: VDD = 2.7 to 3.0 V (2.8 V TYP.) * SINGLE SWITCH CONTROL VOLTAGE: Vcont (H) = 2.7 to 3.0 V (2.8 V TYP.) Vcont (L) = -0.2 to +0.2 V (0 V TYP.) * LOW INSERTION LOSS: LINS1 = 0.27 dB TYP. @ f = 0.5 to 1.0 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V LINS2 = 0.30 dB TYP. @ f = 2.0 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V LINS3 = 0.30 dB TYP. @ f = 2.5 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V (Reference value) * HIGH ISOLATION: ISL1 = 30 dB TYP. @ f = 0.5 to 2.0 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V ISL2 = 30 dB TYP. @ f = 2.5 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V (Reference value) * HIGH-DENSITY SURFACE MOUNTING: 6-pin lead-less minimold package DESCRIPTION NEC's UPG2012TK is a single control GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch for mobile phone and L, S-band applications. This device can operate frequency from 0.5 GHz to 2.5 GHz, with low insertion loss and high isolation. This device is housed in a 6-pin lead-less minimold package suitable for high-density surface mounting. APPLICATIONS * L, S-band digital cellular or cordless handsets * BluetoothTM , W-LAN and WLL * Short Range Wireless ORDERING INFORMATION Part Number UPG2012TK-E2 Package 6-pin lead-less minimold (1511) Marking G3H Supplying Form * Embossed tape 8 mm wide * Pin 1, 6 face the perforation side of the tape * Qty 5 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: UPG2012TK Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. California Eastern Laboratories UPG2012TK PIN CONNECTIONS (Top View) 1 2 3 6 5 4 1 2 3 (Top View) 6 5 4 6 5 4 (Bottom View) 1 2 3 Pin No. 1 2 3 4 5 6 Pin Name OUTPUT1 GND OUTPUT2 Vcont INPUT VDD TRUTH TABLE Vcont Low High INPUT-OUTPUT1 OFF ON INPUT-OUTPUT2 ON OFF ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Supply Voltage Switch Control Voltage Input Power Power Dissipation Operating Ambient Temperature Storage Temperature Symbol VDD Vcont Pin PD TA Tstg Ratings +6.0 +6.0 +26 150 Note -45 to +85 -55 to +150 Unit V V dBm mW C C Note Mounted on double-sided copper-clad 50 x 50 x 1.6 mm epoxy glass PWB, TA = +85C RECOMMENDED OPERATING RANGE (TA = 25C) Parameter Supply Voltage Switch Control Voltage (H) Switch Control Voltage (L) Symbol VDD Vcont(H) Vcont(L) MIN. 2.7 2.7 -0.2 TYP. 2.8 2.8 0 MAX. 3.0 3.0 0.2 Unit V V V G3H UPG2012TK ELECTRICAL CHARACTERISTICS Parameter Insertion Loss1 Insertion Loss2 Isolation1 Input Return Loss Output Return Loss 0.1 dB Gain Compression Input Power Note Supply Current Switching Control Current Symbol LINS1 LINS2 ISL1 RLin RLout Pin(0.1 dB) IDD Icont (TA = +25C, VDD = 2.8 V, Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF, unless otherwise specified) Test Conditions f = 0.5 to 1.0 GHz f = 2.0 GHz f = 0.5 to 2.0 GHz f = 0.5 to 2.5 GHz f = 0.5 to 2.5 GHz f = 2.0 GHz MIN. - - 24 15 15 +17.5 - - TYP. 0.27 0.30 30 20 20 +20.5 50 4 MAX. 0.50 0.50 - - - - 100 20 Unit dB dB dB dB dB dBm A A Note Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of linear range. STANDARD CHARACTERISTICS FOR REFERENCE Parameter Insertion Loss3 Isolation2 1 dB Gain Compression Input Power Note Switching Control Speed Symbol LINS3 ISL2 Pin(1 dB) tSW (TA = +25C, VDD = 2.8 V,Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF, unless otherwise specified) Test Conditions f = 2.5 GHz f = 2.5 GHz f = 2.0 GHz MIN. - - - - TYP. 0.30 30 +24.0 300 MAX. - - - - Unit dB dB dBm ns Note Pin (1dB) is the measured input power level when the insertion loss increases 1 dB more than that of linear range. Caution It is necessary to use DC blocking capacitors with the device. The value of DC blocking capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with the actual board of the system. The range of recommended DC blocking capacitor value is less than 100 pF. UPG2012TK EVALUATION CIRCUIT (VDD = 2.8 V, Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF) VDD INPUT Vcont 56 pF 1 000 pF 6 5 4 1 000 pF 1 2 3 56 pF 56 pF OUTPUT1 OUTPUT2 The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. UPG2012TK ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD Vcont 6pin L2MM SPDT SW Vc1 OUTPUT2 OUT 1 C2 C2 C4 C1 INPUT C1 IN C5 C3 G3H C1 C1 C2 OUT 2 OUTPUT1 Vc2 VDD USING THE NEC EVALUATION BOARD Symbol C1, C2, C3 C4, C5 Values 56 pF 1 000 pF UPG2012TK PACKAGE DIMENSIONS 6-PIN LEAD-LESS MINIMOLD (1511) (UNIT: mm) Remark ( ): Reference value 0.480.05 0.480.05 UPG2012TK RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (package surface temperature) Time at temperature of 200C or higher Preheating time at 120 to 150C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (molten solder temperature) Time at peak temperature Preheating temperature (package surface temperature) Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (pin temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 215C or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2%(Wt.) or below : 260C or below : 10 seconds or less : 120C or below : 1 time : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below Condition Symbol IR260 VPS VP215 Wave Soldering WS260 Partial Heating HS350 Caution Do not use different soldering methods together (except for partial heating). Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 12/22/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd. |
Price & Availability of UPG2012TK
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |